Quote:
Originally Posted by Richard L
I need to track back on previous communications.
3-scroll = 68cc/min at 125psi
4-scroll = 98cc/min at 125psi
|
Hmm. Well, neither number matches what was shown on the Pressure vs. Flow chart I nabbed from you. It shows the 0.3 as flowing 155 cc/min at 125 psi. For comparison, the 0.4 is shown as 207 cc/min at 125 psi.
I'm trying to nail down my flow rate for my jets vs. my fuel injectors. Fuel injectors are (6) 508 cc/min @ 4-bar of pressure, and I have (6) 4-scroll 0.3 mm jets, one in each intake runner.
At 100% IDC (which I know I will never hit), I'd have 508 cc/min of fuel per cylinder, and I'd like 125-130 cc/min of water/meth. I know the hfs-6 gives me 20% adjustability on flow vs. IDC, but I need an idea of what the jets are flowing. The pump with my kit is at 160 psi, correct?