[andysharp]

0.6mm jet definitely working better, big jet was just pushing too much water in.

Checked the system yesterday, the pre amp gain has been left at 1? Should I change this to 2.5?

The SC is set at 5 o'clock
The Wl is set at 12 o'clock
The WH is set at 1 o'clock

Will change the WI and WH as advised above. This just needs them moved an no other amendments ?

The settings I have noted, is this why the water level and water injection lights both come on for a few seconds then the flow shows? Can't remember if the B lights up or not.

Appreciate ur help Richard , still very new to all this!