Re: Failsafe didn't catch a no flow jet
I'm trying to get a grip on how the failsafe actually works too.. Since the mishap I got logging asap, I see with a gauge setup with a scale 0-100 the logs are pretty much inline with the Injector duty.. Does the fail safe monitor a percentage of error on either direction and then trigger a failsafe if outside that percentage? Ie- Idc is 70.. Hfs3 goes either beyond 65 or 75 its failsafes? This gets changed in relation to gain setting though...
Or does it just work with an overall min/max flow? That would mean at high ID the flow would have to fall below where it starts in order to failsafe? Over a wide operating bracket that could be quite a bit and maybe not catch a smaller malfunctioning jet in a multi jet setup..
School me please... Thank you.
Last edited by Craigorypeck; 22-10-2019 at 06:20 PM.
|