View Single Post
  #7  
Old 23-10-2019, 11:04 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Failsafe didn't catch a no flow jet

I have a few questions for you,

1. Are you 100% sure there is a no flow jet?
2. Are you just assumed there is a no flow jet?
3. Once that assumption is made, you automatically put the blame on aquamist's faildsafe etc.
4. I am questioning the title pf the thread.
5. Have you tested the failsafe by plugged up one jet before installation?
6. Have you found the no-flow jet?
7. If yes, what caused the no-flow?
__________________
Richard L
aquamist technical support
Reply With Quote