Thread: Peugeot 207 GTI - HFS4 Finished Tomorrow
View Single Post
  #12  
Old 30-06-2013, 03:02 PM
Richard L Richard L is offline
Manufacturer sponsor
  
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Peugeot 207 GTI - HFS4 Finished Tomorrow
Yes, the flow table must match the jet number. Until you have done the soldering, you can not set the faulsafe (SC, WL and WH) properly.
__________________
Richard L
aquamist technical support
Reply With Quote