Thread: Aquamist 3 issues
View Single Post
  #24  
Old 04-02-2017, 04:59 PM
Nicknacke36 Nicknacke36 is offline
Junior Member
  
Join Date: Jan 2017
Location: Isle Of Wight
Posts: 15
Default Re: Aquamist 3 issues
Right, ��

I've moved the red lead to a pre-crank 12v+ and the relay clicking has now gone away! Thanks for the advice!

However I'm still not getting any red bars on the guage for idle/amount of water being pumped in..

When I rev it, I get the B light flashes then go out as the revs drop back down..

I'm still stuck how to fix this :/

I have the green wire from the grey harness wired into the brown/white lead off the fuel injector. The engine is an M52..
Last edited by Nicknacke36; 04-02-2017 at 05:01 PM. Reason: Wanted to add something...
Reply With Quote