Re: Aquamist 3 issues
Right, 😊
I've moved the red lead to a pre-crank 12v+ and the relay clicking has now gone away! Thanks for the advice!
However I'm still not getting any red bars on the guage for idle/amount of water being pumped in..
When I rev it, I get the B light flashes then go out as the revs drop back down..
I'm still stuck how to fix this :/
The green wire from the grey harness is wired into the Brown/white lead off of the fuel injector. The engine is an M52 if that helps.
I have also noticed some minor corrosion to one of the 3 pins on the black FAV assembly that plugs into the valve..
|