Re: Aquamist 2d Install ? on an FD?
welp you guys convinced me I'll reroute it to get the feed form the secondary injector's BUT! I could use a little help with that . i want to take the feed from the harness and not from so close to the injector , on the v3 summer diagram it shows that you can take the feed from the harness that plugs into the ECU , My harness is a JDM harness would you know if hte colors have changed? also on the ECU there are 3 plugs but the diagram doesn't show 3 plugs just one big one ? am I to assume that the one big plug is all the plugs on the ECU combined for simplicity? also on the summer diagram ..
what is shown is that the ECU itself ? or the harness plug that connects to the ECU? ( in order to locate the correct wires )
|