Re: Failsafe with HKS EVC 6
Hello Richard ...
Ive installed e hfs3 on the car now, i still have the stock turbo setup and want to test that the system works on this setup first, and I have run into a couple of problems:
1- water level light on the gauge is always on, level sensor is correctly installed and all wiring is in order .... could it be a faulty sensor? I cannot begin to purge the system as it wont start the pump even with the sys jumpers.
2- The green idc led is not coming on. I tripple checked the idc connection on the ecu end. The amber thresh led comes on when I blip the throttle, green led never came on. When testing wi th the idc jumper on the circuit board the s+b lights on the gauge do flicker with throttle blipping.
So do I have a faulty green led on the circuit board too?
Any help is apprecited ...
|