Quote:
Originally Posted by rotrex
Or even more flow at this power level. I run this at half the HP.
More gains more after a remap, especially for the direct port jets I have found since going from 0.3mm to 0.4mm-C size jets.
Don'T expect much IAT drop. That's not how WI works anyhow.
|
I inject 44% Water/Meth (500cc) to Fuel (1130cc) ratio in a 1.5L engine @ 1.4Bar running 40s Ignition Timing on boost.
Theory is your guide........ Trial is your best friend
@Rotrex - What do you mean by "That's not how WI works anyhow" ?