View Single Post
  #2  
Old 25-05-2020, 02:04 PM
HenryM HenryM is offline
Junior Member
 
Join Date: Jul 2019
Location: Seoul
Posts: 5
Default Re: Direct port injection nozzle location

Quote:
Originally Posted by Autosri View Post
I’m looking to go to a direct port setup very soon and il be using 6 of the smallest flowing aqua mist nozzles and a 7th before the IAT sensor to make up the rest My target is around 450-500 crank hp

All the installs I’ve seen have the nozzles on top of the manifolds on full view but I’d like to keep it a bit more sleeper and have them underneath

Is this a problem? If so why is it a problem ?

This is on a bmw n54 straight 6

Thanks
That way you'll have to remove the intake manifold every time you need to service the nozzles.
But many N54 guys do it with a sandwich plate.
Twisted Tuning sells a good product that supports aquamist nozzles.
I also have one (tapped for aquamist nozzles) and I can sell it to you for cheap if you need it.
I figured top mount works better for me so I ended up not using it.

Here's the link for the product:
https://twistedtuning.com/collection...nt=37212447757

Let me know if you're interested.
Reply With Quote