Re: Mazdaspeed 3
Richard,
Another question for you. In the wiring diagram you have for the 2008 Mazdaspeed 3, you have pin 1AY listed as the Fuel Injector Relay. It looks like pin 1AY is listed as "+12V from ignition switch, PJB F69, 20A" in the factory connector pinout diagram I have.
Also, for #1 Fuel Injector Coil + you have pin 2BG listed which according to the factory connector pinout diagram is "Fuel Injector #1 & #4 Common".
Finally you have #1 Fuel Injector Coil - listed as pin 2BB which is "Fuel Injector #1" according to the factory connector diagram pinout.
Can you verify the diagram you have on page 1 is correct?
|