Re: for gain trimmer
I are experiencing the engine stumbles a bit at moment the system starts to spray, possibly due to over-spray. My injector is boschEV14 980cc x6. I solder pre-amp gain from 1x to 1.5x. When I put thres trimmer 12 o'clock (42%) , the jet spray monment, my engine fuel injector duty cycle is only 23% only. So I turn thres trimmer clockwise to AM 2:30, the stumbles is decreased. Because I had 2 big tubrochargers, I also turn P-I/R to 65%( IDC )/ 35% ( boost). Any advise and suggest about my problems ? Thanks
|