Quote:
Originally Posted by Arthurwiljami
Did the spraying test today again but the pump didn?t power up. Fisrt time we installed the system we had wrong wiring diagram for the car but that time it sprayed but had other issues HFS-3 working correctly.
This is how I did the test:
1. I disconnected the 6mm hose from FAV
2. Took the jumper from FAV (it says "inj" in the manual but its "FAV" in the controller)
3. turned on the ignition
4. Put the jumper to the SYS
Nothing happened.
Does this mean an install error or could I check something else?
This is what the contoller looked pefore I Took the jumper from "FAV"
|
If you pull the jumper from FAV, you are disabling the FAV and it will not inject. You MUST use the jumper from PRK to put os SYS otherwise you are disabling parts of the system.