View Single Post
  #5  
Old 07-08-2019, 08:19 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: WRX FA20DIT failsafe issue

Please explain how do you initiate failsafe on and failsafe off?

1. Check the DR1 jumper is linked
2. Put the jumper link to "DFS" can let me know if stops the CEL.
3. If it doesn't, short out the white and brown wire near the ecu.

Let me know. the above tests are try to establish where the loss of connection lies.

Post a picture of the jumper settings here
__________________
Richard L
aquamist technical support
Reply With Quote