I had a good read on your link an got to know the car a bit better.
At 8:1 compression ratio you should be able to run 12psi without any problems - round about 93 octane fuel.
if you have 4x 50 lb injection, you shoudl have enough fuel to get 380-400BHP with a reasonabe a/f ratio of around 12:1.
The addition of WI will safeguard the egine with the boost is up beyond 12 psi to arounf 12-20psi - not sure that your turbo and cam will supoprt that amount of flow. I think a nozzle size of 0.7 running at approximately 280cc/min will be sufficient but 0.9-1mm for summer time.
__________________
Richard L
aquamist technical support
|