If you are planning to apply WI as a general cooling media for added safety. Run 10-15% w/w ratio.
440x4 =1760cc/min 10% = 170cc/min (0.4) and 15% =260cc/min.(0.6mm), The calculation is not 100% accurate as I will not be sure if the shuflo pump's presure peaks will affect the delivery rate - need to measure the rate manually.
Have seen two MR2s running our 2d system (progressive) using a 0.6mm jet. Power was approximately 260-280 at the crank.
__________________
Richard L
aquamist technical support
|