[Holeshot]

All 3 led light up at the board, checked power at the pump relay and I have main power into relay and power on both leads from the level switch but no power going to the pump from the relay. Tried another relay and same thing.

If I test for power in a clock wise manor on the relay, for some reason when I touch the blue wire the pump will flicker on and then nothing.

This is a straight forward process I know, but for some reason it is not working, am I missing a jumper on my board? This install was redone last year when I had my motor built and Vipec 88 installed by Innovative Tuning in Buffalo. I know they had a few issue's getting things working for fail safes and the had talked to Richard or someone else at AquaMist.