View Single Post
  #336  
Old 25-06-2013, 04:48 AM
Bazman Bazman is offline
Junior Member
 
Join Date: Jun 2013
Location: New Zealand
Posts: 5
Default Re: HFS-4 Q&A, application for your engine...

Quote:
Originally Posted by Howerton Engineering View Post
In reference to needing staged jets.

The Aquamist system runs at a constant 180psi. If the parts are designed to work together then there is proper atomization even at very low flow rates. Here is a video of a system put together that flowed 3000CC at 180psi from 6 x 1.0mm jets. The system in the video is run from 100% down to 20% then back up to 100% and atomization is outstanding for the entire range. We then pulse the system to show the quick on/off capability of the system as well.

http://howertonengineering.com/2010/...-hfs-6-system/

https://www.youtube.com/watch?v=qeBw...layer_embedded
Wow, that is very impressive. I'd like to do a project like that someday on a built twin turbo LS 7 liter, but for now I'll only need 1200 cc lol

I had a look around your site - love the twin tanks with LED's.

I run a 15L tank now and it lasts me about 3 tanks of gas on average normal street/highway driving, so going down to 7.5L would require topping up every tank of gas, which could be an issue for long trips away from home. But I love the concept of not having to pre-mix and being able to pour 100% meth into one tank and filtered water into the other.
Reply With Quote