View Single Post
  #27  
Old 20-10-2011, 11:20 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mini R56 2009 Factory JCW HFS-3 Install (Cooper s owners too)

Are you saying you have no gauge bar display or no water flow pass the jet?


sofric, good point and well picked out...

Shams problem was due to the controller's flow table mos-matching the actual flow (too low for the display even with the SC at fully clockwised). Since then, he has sent the controller to us and got it eflashed.

The HFS (High Flow System) is designed with two nozzles operation in mind. For low flow application as in low-boost/small engines, the flow table of the controller needs to be reflashed. Jeff at Howerton Engineering in the US and us in UK, who will gladly do as a free service if you pay the return postage. unfortunately we don't have another dealer outside this
__________________
Richard L
aquamist technical support
Reply With Quote