View Single Post
  #3  
Old 28-07-2014, 05:56 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: New water tank system

Thanks for chiming in.

The four dimples are for keeping the tank stay in shape. Large plastic surfaces tend to loose its original shape in warm environments and filled. The dimples on each side of the tank are thermally welded together during injection moulding. They form a strong a single air-tight wall. If you wish to use those dimples for mounting purposes, you need to drill a couple of through holes.

I have worked on this tank for a while now. I shared your concern regarding liquid sloshing around during corning. As the width is only 2.6", side-way sloshing is of no concern. If the thin face is in the line of travel.

The tank is baffled no chance of sloshing in any direction. I will make a video to demonstrate it, time permitting.

The tank is a perfect square, 13" x 13". I am not sure your comment about tilting it 90 degrees. Please do explain.

Richard
__________________
Richard L
aquamist technical support
Reply With Quote