View Single Post
  #5  
Old 19-02-2015, 10:35 PM
GOFAST GOFAST is offline
Junior Member
 
Join Date: Jul 2014
Location: holland
Posts: 14
Default Re: WMI set up qestion

the 10th of March my tdi will go on the dyno.
there are small differences in the set up of the engine compared with the printout seen above.
a higher compression and back to the original shape of the combustion chamber in the piston are the biggest chances.(still lower compression than stock)

now the engine is also equipped with snow performance stage 2+.(used)
its a kit originally used for a gasoline engine.(150psi)
richad L made me a custom 50 / 60cc pre turbo nozzle, thanks for all the good advise and service.
I al so inject 2 x 100cc post intercooler.
my mixture is:

-1000cc of demineralized water.(hope that helps the erosion problem a bit)
-800cc of methanol.
-200cc of ethanol.

I can feel that it works, but I always want to measure how much .
if you got any tips for optimizing my mixture, please let me know.

here 4 photo's of my system after 28 hours of work.







__________________
keep on modifying

Last edited by GOFAST; 20-02-2015 at 07:25 AM.
Reply With Quote