Quote:
Originally Posted by Richard L
The bar display on the gauge has to calibrated by using the SC potentiometer. Show three bars is about right. The default full scale display of 8-bars (12 o'clock) is set for 3x 1mm jets.
Put the SC to about 2-3 o'clock, you should se 5-6 bars. If you wish to have more flow, use two jets.
|
My potentiometer settings are as follows:
SC: Maximum (fully clockwise)
Threshold: Minimum (fully counterclockwise)
GAIN: Maximum (fully clockwise)
With these settings, I see the 3 bars. With SC at 12 o'clock I see one bar only.
I ran out of water on the way to my office this morning, but I'll fill her up over the lunch hour and do some more tests with a higher FIDC%
FAV location pics:
