View Single Post
  #24  
Old 27-03-2016, 08:20 PM
parmas parmas is offline
Senior Member
 
Join Date: Jun 2013
Location: malta
Posts: 210
Default Re: Questions on my direct port meth setup

Quote:
Originally Posted by robos4 View Post
Cheers,

No offense - always good to hear other opinions and it's the Internet after all did not know you were so educated in all this (my bad).

Just told workshop to follow your recommendations.

Hoping to have it all done by Fri and hopefully start tuning.

I was thinking of setting the spray to start about 30 to max 50% of what could be sprayed (not looking for huge power).

If you disagree, let me know.

Rob

Ps. Will absolutely share results and findings.. Who knows, part of me thinks it won't work (cause less power, can't find the right mix of spray v timing and fuel, meth sucking the lines causing rich spot after lift off, too larger jets etc)
Testing, patience and time is your friend from now on.

I spent countless days finetuning myself water injection vs different mixtures. Surely it's not a one time pass but don't give up trying to achieve your goals and sometimes when taking risks is where the power is achieved.

GoodLuck!
Reply With Quote