Thread: problems with FAV solenoid - no work, but getting very hot! ::fixed::
View Single Post
  #2  
Old 09-06-2012, 05:31 PM
softic softic is offline
Member
  
Join Date: Jul 2011
Location: Moscow, Russia
Posts: 59
Default Re: problems with FAV solenoid - no work, but getting very hot!
ok, some new info:
  • the voltage on FAV solenoid is always around 13,6V
  • I have tried installing a new FAV and solenoid assembly (from second kit) - no luck at all
  • tested the pump - it works perfect (when disable jumper FAV and enable jumper SYS)

please, help!! how can I test that the mainboard is not broken?
today it worked for few minutes but later on stopped again ((((( should I check voltages on the mainboard diag pins?
__________________
Alexey K.
I drive Peugeot 207 RC 225 bhp with HFS-3 onboard / tuned ECU
Reply With Quote