Re: New water tank system
The baffle is a long vertical dividing wall from the top (filler cap) to the bottom. The wall is approximately 3" from the outlet ports face.
The wall where the dimples met is approximately 3mm thick. It is debatable if it can withstand a negative 5G on a full tank (5kgs). How many G's on a 30 mph crash test?
Anyway, we are a bit concern about using just two 6mm bolts of the drilled dimples. We supplied two acetal stand-offs to filled the voids on the dimples, giving extra support. These stand-offs only comes with our purpose made bracket.
__________________
Richard L
aquamist technical support
|