View Single Post
  #17  
Old 20-09-2014, 05:19 PM
stevieturbo stevieturbo is offline
Senior Member
 
Join Date: Nov 2005
Location: Northern Ireland
Posts: 80
Default Re: Using Aquamist for brake cooling system!?

Exactly what is the makeup of the OEM setup ? Any photos ?

I'd be amazed that you could go larger one way or another, even if it meant fitting adaptors and re-using the standard calipers or another sliding caliper.

It would be very easy to have some discs/bells made up and just stick with your existing calipers and diameter if you really could sort anything else. That would at least allow a proper disc to be used that will take the heat from racing pads, then use suitable pads.
That should only be a few hundred quid

Not sure where your existing pads fall, but some milder ones might actually help the heat situation when used with cheap discs.

As for water...maybe spray near the hub, so water gets expelled outwards through the vanes ?
No idea really where might be best for spraying.
Reply With Quote