[jondee86]

I have been thinking about setting the THRES a bit higher as my current
bypass valve setup seems to be keeping inlet temps under control much
better than the earlier setups I had.

Are the small pots fully variable or do they have to be set at the marked
positions ?? Can I increase by half a click instead of full click ??

The pump is installed in the trunk with the motor on top and the pump head
level with the bottom of the tank. The pump has a dedicated power supply
from the battery directly to the pump relay.

I don't have the serial number to hand, but it is the HFS3-v3.1 system and
your invoice is #2171

Cheers... jondee86