Thread: 92 Toyota
View Single Post
  #1  
Old 12-08-2013, 08:43 AM
altitude30717 altitude30717 is offline
Junior Member
 
Join Date: Mar 2013
Location: USA
Posts: 6
Default 92 Toyota

http://www.aquamist.co.uk/vbulletin/...5&pictureid=42
http://www.aquamist.co.uk/vbulletin/...5&pictureid=41
http://www.aquamist.co.uk/vbulletin/...5&pictureid=40
http://www.aquamist.co.uk/vbulletin/...5&pictureid=39
http://www.aquamist.co.uk/vbulletin/...5&pictureid=38
http://www.aquamist.co.uk/vbulletin/...5&pictureid=37
http://www.aquamist.co.uk/vbulletin/...5&pictureid=35
http://www.aquamist.co.uk/vbulletin/...5&pictureid=34

Hi,
I want to say Thanks for all the post's in the HFS3 forum, reading there helped me with my installation, and Thanks to Aquamist for such a quality product.
My questions,
Is a .6mm jet to big for use with a 3.4L V6 with an Eaton M-62 blower with 6 lb. pulley, injectors are 250cc. I've read that Roots style blowers benefit from higher flow due to the heat generated?
Also,
*when testing #3 on pg 14 (user manual) I only illuminated 4 bars, (8 bars without the jet)
the SC dial is fully clockwise, WL is fully counter CL and WH is fully CL,
when I drive the failsafe is constantly triggered, do I need to have my controller reflashed for lower than normal flow? I cannot dial in 6 bars on my gauge @ 100% flow in order to properly set the WH,
I linked the DFS to drive, but do not wish to leave it like that.
All thoughts on my questions and installation are welcome,

Thanks & Cheers
Reply With Quote