View Single Post
  #101  
Old 09-06-2018, 09:24 AM
dlheman dlheman is offline
Member
 
Join Date: Feb 2014
Location: Somewhere
Posts: 48
Default Re: Tuning for water injection: fuel, ignition, and EGT

Quote:
Originally Posted by RICE RACING View Post
Final note, some knock is good! generally the closer any engine runs to destruction the better its performance will be! so its not uncommon with Life Racing electronics to run the engine on the verge of this point all of the time to extract the most power and highest efficiency. Water Injected cars will allow you to run closer to this point without then quickly leading to pre igntion, this is no one really talks about, but is one of the key things that WI allows (not higher ratios of meth than 50% cause that will lead to far inferior performance FYI)
I was told, when fine tuning REVO software for VW's TFSI engine, the guideline stated to keep adjusting the fuel, timing and boost until the knock retard value reads -3.0 because that's when the engine makes the most power. Maybe it is safe to do that in TFSI engine which comes with forge piston standard.
Reply With Quote