[Canonshooter]

Here are the results of my re-tune with the Aquamist HFS3 system using ordinary -20 degree blue washer fluid (about 30% methanol, the rest water);

Old Tune / New Tune
max WHP - 261 to 274
max torque - 310 to 345
max IDC - 98% to 88%
AFR - 11.1/1 to 11.5/1

Conservative tune, zero knock events up to 140 MPH on the dyno. The car runs very smooth and of course, feels considerably stronger. I'm sure my EGT is now lower too.

Just for giggles, I had them do one full power pull in failsafe mode (wastegaste pressure, 7 PSI). I still made 240 WHP and 245 torque.

I had a 200 mile drive back from the tuner to dial in the failsafe. I think it's close now and will fine tune the settings over the next week or so.

Overall, I'm pleased with the product, the support and the results!