turbojack wrote:
The pulse extender and the relay are together in a hobby box (your schematic was used when making it). The wires exiting from the box are:
1) Black - labled H2 (water pressure switch?)
2) Grey - labled H1 (water pressure switch?)
3) Red - labled power (to pin #21 on DDS3 junction box?)
4) Yellow - pump (to red wire at washer pump?)
Since the pulse extender is made for you by someone, could you ask the person to post the circuit with "wire out" colour so that I can check. I know some colours are pretty obvious, but I would like to be 100% sure before saying "YES"
__________________
Richard L
aquamist technical support
|