Re: BMW N20 EWG - HFS4v2 install
Thank you Richard !
My car will be tuned for a maximum 23/24psi
Few more important questions:
1.
If I'm going to use the factory windshield washer fluid tank for the meth which has a low sensor inbuilt can I totally disregard the blue "TRUNK" harness?
2.
For my hfs4v2 , can you confirm if these settings are correct: (map sensor: 3, PA gain: 2.5, F/S MPS: 2) ?
3.
My car has basically no lag and I don't want meth spraying on low boost, what can I do to start kicking in the water/meth around 14psi and reach full by say 22psi or so?
4.
How to set the AUXFS?
I will being a DIY install and post it up on the forum once I'm done.
thanks in advance!
Tom
|