[nick_r]

Hi

I try to explain it as good as possibel,i just did the tests.
I did the bar test and can only go from 0-5 leds with 20 clicks

Then the sys test.
First with nozzle
I need to turn the sc full to the right (clockwise),to have 4 leds
If i turn the sc 5-6 cliks back to the left,i have 1or2 leds and the fail safe activates.(yellow led)

Without nozzle
I allready have 8 leds with the sc at 12-2 o'clock,don't have to turn farther then that.