Re: confused with hsf pcb
Solved, this board revision has a jumpers set on opposite
did x1.5 and pad 2-3 solder for 3 jets, seems it flows reasonably
but see no power gain((
tested at mustang dyno
started at 1.2 bar with gas afr 11.5 , injecting pure ethanol (96% grade) went to 10.5
pulled -10 to 17% of fuel to match11.5 gas afr and no power gain(((
added 3-4*, got +10 whp an average, added 5* no luck
total timing 18 to 24* with wmi active
|