Quote:
Originally Posted by Richard L
1. Set SC to display 5-6bars at WOT
2. Set the WL to 10am and WH to 2pm.
Setting up the WL:
3. If the failsafe stops triggering, move to 11am and 2pm
4. If the failsafe stops triggering, move to 12am and 2pm
5. If the failsafe starts triggering, move to 11am and 2pm
The WL is now set
Setting up the WH:
6. If the failsafe stops triggering, move to 2pm to 1pm
7. If the failsafe stops triggering, move to 1pm and 12pm
8. If the failsafe starts triggering, move to 12pm and 1pm
The WH is now set.
|
Set SC to display 5-6bars at WOT
2. Set the WL to 10am and WH to 2pm.
----> Did this setting: SC displayed 5-6 Bars at WOT with WL at 10AM and WH at 2PM (Same occurrence happens)
This means the failsafe triggering? So i proceed to
step 5 and step 8?
Setting up the WL:
"5. If the failsafe starts triggering, move to 11am and 2pm"
----> Does this means i set WL to 11am
and WH 2PM? Or do i turn WL to 11AM then 2PM?
Setting up the WH:
"8. If the failsafe starts triggering, move to 12pm and 1pm"
----> Does this means i set WL to 12pm
and WH 1PM? Or do i turn WH to 12PM then 1PM?
Are 12AM and 12PM at the same position?
"move to 12am and 2pm"
"move to 12pm and 1pm"
Do i execute these steps with engine start or?
Thanks and looking forward for your reply =)