View Single Post
  #2  
Old 22-11-2010, 04:05 PM
Howerton Engineering
Guest
 
Posts: n/a
Default Re: EVO intercooler spray

That's a very nice looking tank. You can put the jet in the hot side of the IC, but you will have to add that amount of water in you calculations for injected fluid into the engine.

If you spray a very fine mist on the outside of the IC, and you only have to do this on the first portion of the IC, it can be very effective.

If you are using a washer pump to pressurize the .3mm jet, test fire it and make sure you are getting good atomization(depends on the pump pressure) for either way you decide to run the jet.
Reply With Quote