Thread: Nozzle size
View Single Post
  #3  
Old 06-06-2018, 02:24 AM
SAMzG35 SAMzG35 is offline
Junior Member
 
Join Date: Nov 2014
Location: Canada
Posts: 15
Default Re: Nozzle size

I have a VQ35DE which is single throttle body. The idea of individual ports is nice but sounds like a pain lol.
Lets say if decided to go ahead with individual port. Would this setup work?
If I decided to up my injection to 20% which would make a total 2400cc needs to be injected.
a 0.7mm flows at 350cc at 120psi.
So if I install 6 x 0.7mm into each cylinder I'm at 2100cc. Then I will install another 0.7mm onto the intercooler outlet. Total of 2450cc.
Does this sound about right?
Reply With Quote