Thread: Nozzle size
View Single Post
  #6  
Old 06-06-2018, 02:56 AM
dlheman dlheman is offline
Member
 
Join Date: Feb 2014
Location: Somewhere
Posts: 48
Default Re: Nozzle size

Actually you will need bigger jets than what the table says.

This is because you are running 7 jets, and at least 6 of them will requires the use kf checkvalve. Each check valve needs 1bar of pressure to crack open, which means a further loss of pressure. You may want to get the 3000cc/min pump for this.

Actually, check out the recent post by RICE RACING in this forum in another section, which shows RB26DETT with 6+1 setup. I am sure he can help you.
Reply With Quote