Thread: Tap/thread size to add 4mm fitting to direct port manifold
View Single Post
  #2  
Old 17-06-2013, 01:40 PM
Richard L Richard L is offline
Manufacturer sponsor
  
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Tap/thread size to add 4mm fitting to direct port manifold
The aquamist jet thread is M8 x 0.75mm
You can order the tap from : www.aquamist-direct.com

If you have room, it is better to order a 1/8NPT jet adaptor. The 1/8NPT is quite common in the US, so save yourself a few dollars by not ordering the M8 x 0.75mm tap (quite expensive)

Richard
__________________
Richard L
aquamist technical support
Reply With Quote