Quote:
Originally Posted by denis1282
Hello.
Thank you for your great product, but I encountered some problems during the settings and now I no longer have confidence in the fact that I did the right connection (that I have correct wiring connections).
Please help me find answers to the following questions:
1) Do you have wiring diagram for opel astra j (motor type A14NET)?
2) Where are should be connected white, brown and black wires located in the grey harness?
3) Fail-safe goes into "safe mode" too early and does not allow to configure boost pressrure more than 0.6 bar
Thank you in advance for your support.
|
Answers:
1) No. Not yet
2) Cut wire from pin #30 of K20. Splice in the white wire (ECU side) and brown wire to the Solenoid side. Black is not used.
3) Adjust WL counter-clockwise a few clicks.
What is the maximum Fuel injector IDC%?