Thread: Mazdaspeed 3
View Single Post
  #7  
Old 19-04-2012, 07:18 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazdaspeed 3

Yes, you can continue using the above wiring diagram. We just cut the PWM signal to the BCV. It will work with any valve.

One reason for a lower duty cycle is needed on the grimmmspeed valve is probably due to slightly larger orifice in the ports.
__________________
Richard L
aquamist technical support
Reply With Quote