View Single Post
  #21  
Old 08-12-2004, 10:39 PM
masterp2 masterp2 is offline
Senior Member
 
Join Date: Nov 2004
Location: Desert SW, Arizona USA
Posts: 86
Default

Stuart

Another thing to remember, the colder it is, the slower it moves, especially true in nozzles. If, you can insulate every line, and get solution to the nozzle still cold, it will have greater viscosity, and atomization will be worse, and flow rate will be lower, assuming same pump pressure. (you can prove this in the shower as well)

My butt dyno doesn't work very well, usually more placebo going on in my head than anything, especially the harder I try to make something what it is not. Numbers don't lie though.
__________________
Michael Patton (aka Killerbee)
Reply With Quote