View Single Post
  #52  
Old 20-07-2017, 02:15 AM
jondee86 jondee86 is offline
Member
 
Join Date: Dec 2015
Location: New Zealand
Posts: 78
Thumbs up Re: Nozzle spray angle...

Quote:
Originally Posted by rotrex View Post
Please measure the pressure after the throttle body before swapping air filters.
Good suggestion Since the pressure loss of the ducting between the throttle
plate and the s/c inlet is fixed, I shall tap a fitting into the throttlebody in front
of the throttle plate. That way I can measure the pressure loss of the section
of ducting with filter that will be changed.

I have found cheap China made digital differential pressure meters on Aliexpress,
and this gives me a good reason to buy one, plus an infrared thermometer for
reading the temperature from each cylinder at the exhaust manifold.

Cheers... jondee86
Reply With Quote