View Single Post
  #59  
Old 28-10-2017, 09:04 PM
RICE RACING RICE RACING is offline
Senior Member
 
Join Date: Oct 2003
Location: Utopia
Posts: 511
Default Re: Nozzle spray angle...

Quote:
Originally Posted by jondee86 View Post

PS: Does a methanol and water mix always turn milky ?
Not sure if its 'normal' but when I get 100% methanol then do the blend to water (WM50 by mass) it always went milky as well as quite hot, after some time it settles down and it goes totally clear.

I have some of the above that is in a long term test glass container and its crystal clear after 7 years (1/2 air in there the rest WM50), the components I have sitting in there are some valves, fittings, ATL fuel foam, and lines I use. I test the parts every so often and they all are working as brand new items.

I'll take a photo later if I remember and post it up.
__________________
http://www.riceracing.com.au
RICESP > F40 > Zonda > ZR1
Water Injection Specialist
"Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!"
Reply With Quote