Keep having problems with pressure switches jamming open?!? I even tried sticking a vacuum on it while I checked it with a multimeter and it was fliping open and closed rapidly :S This is the third one that has died on me and I'm at a loss to explain why.
On a better note, I fed the MF2 from my 3rd party pressure transmitter of my digital boost gauge. I wound down the input cut off until the light came on and then wound it up two full turns again. I'll need a second person to help me set it up properlly but for now that will do. So it should now be using the 3D mapping function if I'm understanding things. Does it hit max duty cycle at 5V by default?
__________________
Vectra 1.9CDTI 235whp/380lbft (270bhp/405lbft) NOS+Methanol
|