Thread: Aquamist HFS-6, low impedance injectors and motec M600
View Single Post
  #1  
Old 16-08-2012, 03:13 AM
RUFBTR RUFBTR is offline
Junior Member
  
Join Date: Aug 2012
Location: Michigan
Posts: 9
Default Aquamist HFS-6, low impedance injectors and motec M600
I have an 87 Ruf BTR being re-done by TurboKraft and I need some help. I bought a NIB HFS-6 system from another member at Jeff's recommendation, I am using a motec M600 ecu and low impedance injectors, in this configuration the system will not trigger off the IDC because the voltage never drops on the injectors any suggestions?
Reply With Quote