Re: Aquamist HFS-6, low impedance injectors and motec M600
Thank you for the fast response Richard. The discussion on the injectors was never fleshed out, at the time I was seeking the HFS-6 because we were discussing running six water/methanol ports on the six long intake runners. I was not aware that the impedance of the injectors were a concern, I did on more than one occasion discuss the fact that I was running Motec, moot point now. The system is installed, bought and paid for, what are the liabilities I face if I run off MAP instead of IDC.
Thanks again for your kind consideration,
Best regards, LP
|