View Single Post
  #11  
Old 01-08-2018, 05:13 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Aquamist controller failsafe to OE engine map

I think all these is possible if I can get my head around those meter readings. May have to put the car on idle and re-test those pin against ground.

1. at idle: probe each voltage on all the pins.
2. keep comfort button down (for less than 10 second) and test all the pins again.
__________________
Richard L
aquamist technical support
Reply With Quote