I recently purchased a CoolingMist Deluxe Single Stage Performance Package.
I opted to go with a 150PSI Sur-Flow pump and 3GPH nozzle. Should atomized the water nicely.
My question is I will be running water only, mainly to supress detonation/pinging as a safety device. I have a program that adjusts itself on timing via Air Temp, so my tune wouldnt need re-tuning if water is used. However I have thought about using a 15% meth mix so my crappy 91 octane ( I wish i was living in Hungary still 101 octane) to about 95 octane or so....just a small hint of extra fuel.
My question is what do you think about my setup? and if that 15/85 mix is a good idea or just stay 100% water? Have you guys had any trouble with injecting water or any mixtures, like adverse effects
I have received nothing but great service from David Hill, and his parts are top notch....but i would like to know what you guys think.
2002 4.6L Mustang GT
Paxton 1000RR 8-10PSI
Long Tube Headers
Catted Hi-Flow H-Pipe w/ Spintech Catback
42 lb/hr Injectors
Upgrade Fuel Pump
SCT chip tune
http://coolingmist.com/detailpage.aspx?pid=02P